TallyGenicom 9050N - Скачать руководство пользователя страница 99

Страница: 99 / 172

User Manual

8-5

No Power

Troubleshooting

No Power

Cannot Print

Printing is Not Clear

Status

Items to check

Action

There is no power.

Is the power switched off?

Press the printer switch to the <I> position to turn
the power on.

Is the power cord disconnected or not securely
connected?

Switch off the power and connect the cord to the
power outlet and printer again. Then, switch on
the power.

Is the power cord connected to a power outlet
with the correct voltage?

Connect the printer exclusively to an outlet with a
suitable voltage rating and current rating.

Power is interrupted
frequently.

Printer may have malfunctioned.

Switch off the power to the printer, remove the
plug from the power outlet and contact Technical
Support.

Is the power cord disconnected or not securely
connected?

Switch off the power and connect the cord to the
power outlet and printer again. Then, switch on
the power.

Status

Items to check

Action

Print instruction was sent but
processing did not start.

Is the fault indicator lit?
Is the print-ready indicator off?

Carry out the action according to the
status of the indicator.

Is there any message displayed on the
control panel?

Check the message, then carry out the
action.

Is there any message displayed in the
computer?

Check the message, then carry out the
action.

Status

Items to check

Action

Transparencies are not printed clearly.

Are the correct type of transparencies
used?

Load the correct type of transparencies.

Are the transparencies correctly loaded
in the paper tray?

Load the transparencies correctly in the
paper tray.

Postcards are not printed clearly.

Are the correct type of postcards used?

Load the correct type of postcards.

Are the postcards correctly loaded in
the paper tray?

Load the postcards correctly in the
paper tray.

Envelopes are not printed clearly.

Are the correct type of envelopes used?

Load the correct type of envelopes.

Are the envelopes correctly loaded in
the paper tray?

Load the envelopes correctly in the
paper tray.

Содержание 9050N -













































































































































































Результаты поиска

Содержание 9050N -

Отзывы:

Похожие инструкции для 9050N -

Бренды по названию

Популярные бренды

TallyGenicom 9050N -, Руководство пользователя

Результаты поиска

Содержание 9050N -

Отзывы:

Похожие инструкции для 9050N -

Бренды по названию

Популярные бренды