TallyGenicom 9050N -, Руководство пользователя

Страница: 39 / 172

User Manual 3-13
Printing on Special Media
Basic Printing Tasks
page toward the front of the printer.
2.
Adjust the paper guides to the size of the label sheets.
3.
Change media type at Operator Panel via the Paper Menu’s Media Type selection.
4.
Select Label as the Media Type in the Paper Options window within your Printer
Properties.
5.
Click OK .
6.
Click OK .
Custom Size Paper
You can print custom size from Trays 1 through 3 and the A3 sheet feeder (2TM). Tray 6 and
Tandem tray only prints standard paper. The following paper size ranges can be printed from
each tray:
NOTE: When loading custom size paper in the trays load by the correct edge (long or short) and to adjust
the paper guides as necessary. See “Loading Paper” on page 3-1 for instructions on loading paper
into each tray. For duplexer, the minimum width is 89 mm and length is 127 mm. maximum is 297
width and 432 length.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To load and print custom paper:
1.
Load the media in the desired tray.
2.
Change media type at Operator Panel via the Paper Menu’s Media Type selection.
3.
Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
Input Tray Output Tray
1 2-5 Standard Stacker Upper Stacker Lower
Width 89 - 297 mm
(3.5 - 11.70 in.) 140 - 297 mm
(5.5 - 11.70 in.) 89 - 297 mm
(3.5 - 11.70 in.) 203 - 297 mm
(7.9 - 11.70 in.) 203 - 297 mm
(7.9 - 11.70 in.)
Length 98 -432 mm
(3.87 - 17 in.) 182 - 432 mm
(7.16 - 17 in.) 98 - 432 mm
(3.87 - 17.0 in.) 182 - 432 mm
(7.16 - 17.0 in.) 182 - 432 mm
(7.16 - 17.0 in.)
Tray 1
Trays 2-5 Tray 6