TallyGenicom 9050N -, Руководство пользователя

Страница: 65 / 172

User Manual 5-7
PRINTER SETUP USING THE EWS
Networking
5. Select [Create a New Port] and select [Standard TCP/IP Port].
6. Select [Next].
7. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear.
8. Select [Next] and provide the following information. Enter [Printer name] or IP address,
for example: 172.168.1.31. If the above IP address is entered, the Port Name will default
to IP_172.168.1.31.
9. Select [Next]. Additional port information will be required.
10. Under [Device Type], select [Custom] then [Settings].
11. Ensure [Protocol] is set to [Raw].
12. Ensure [Port Number] is 9100 and [SNMP Status Enabled] is deselected.
13. Select [OK].
14. Select [Follow the instructions on the screen to finish installing the printer.]
WINDOWS XP AND VISTA
Windows XP requires administrator privileges.
With Windows XP, there are three options for printing using TCP/IP.
• Microsoft LPR
• Port 9100
• IPP
In order to use Microsoft LPR, it must first be installed on your system.
Microsoft LPR
To install this port, the following needs to be carried out:
1.
Select [Start].[Settings].[Control Panel].[Printers and Other Hardware].
2.
Select [Printers and Faxes].
3.
Click [Add Printer], then select [Next].
4.
Select [Local printer attached to this computer], clear the [Automatically detect and install
my Plug and Play printer] check box, and then click [Next].
5.
Select [Create a New Port] and [Type Standard TCP/IP Port].
6.
Click [Next].
7.
[Welcome to the Add Standard TCP/IP Printer Port Wizard] appears.
8.
Click [Next] and provide the following information. Enter [Printer name or IP address],
for example: 172.168.1.31. If the above IP address is entered, the Port Name will default
to IP_172.168.1.31.
9.
Click [Next]. [Additional Port Information Required] displayed.
10.
Under [Device Type], select [Custom] then [Settings].