TallyGenicom 9050N -, Руководство пользователя

Страница: 100 / 172

8-6 User Manual
Paper Incorrectly Fed
Troubleshooting
Paper Incorrectly Fed
Noise
Network Troubleshooting
USING TCP/IP
This section provides information on the possible causes, verifying methods and recommended
actions pertaining to errors which may occur when the printer is used with TCP/IP.
Status Items to check Action
Paper cannot be fed.
Paper jams occur.
Multiple sheets of paper are fed.
Paper is fed at an angle. Is the paper correctly set? Load the paper correctly. For
transparencies, postcards or envelopes,
fan them well first to allow air to enter
between each sheet before loading.
Is the paper damp? Replace with paper from a new ream.
Is the correct type of paper used? Load the correct type of paper.
Is the paper tray pushed in? Push the paper tray completely into the
printer.
Is the paper jammed? Remove the jammed paper.
Is the printer placed on a flat location? Place the printer on a stable surface.
Are the paper tray guides set in the
correct positions? Set the length guide and width guide in
the correct positions.
Did you print any picture postcards? Clean the feed roll.
Status Items to check Action
Strange noise occurs. Is the printer placed on a flat location? Shift the printer to a stable surface.
Is the top cover open? Close the top cover tight.
Is the paper tray pushed in? Push the paper tray completely into the
printer.
Are there foreign objects inside the
printer? Switch off the power and remove any
foreign objects inside the printer.
If the object cannot be removed unless
the printer is disassembled, contact
Technical Support.