TallyGenicom 8124, Руководство пользователя

Страница: 298 / 306

298
Appendix
E
Precautions/Limitations
E.1
Precautions/Limitations
This section describes precautions/limitations for using the printer.
About additional Hard Disk Drive
●
When the printer has a Hard Disk Drive installed, the data in the Hard Disk
Drive may crash if the power to the printer is cut, for example, due to a power
outage, during printer operation.
●
When a Hard Disk Drive is installed, it can be specified as a destination to store
print data from 1pd, SMB and IPP. The storage destination of each forms of
HP-GL and HP-GL/2 will be fixed to the Hard Disk Drive. It cannot be changed
to another domain.
●
When the Hard Disk Drive is initialized, the following data will be deleted:
additional fonts, each form of HP-GL and HP-GL/2, and SMB folder. Secure/
sample print documents and logs will not be deleted.
When the print result is different from the settings
Insufficient capacity of the print page buffer may cause unexpected print results
such as the following: In this case, it is recommended to add memory capacity.
●
Printed only on one side of the paper when 2 sided print is specified.
●
The job is cancelled (when the data cannot be stored in the print page buffer,
the job including the page is canceled)
The print result may be different from the settings, due to the principles of laser xerography, when one
dot or a line at 1200 dpi is set to print directly.
About options
For using the secure/sample print feature and the Page Print mode, a built in
Hard Disk Drive is required.
About the meter count for 2 sided prints
For a 2 sided print, a sheet of plain paper may be inserted for adjusting pages
according to the specified number of copies, depending on the application in use.
In this case, blank sheets inserted by the application are counted as 1 page.