TallyGenicom 8124, Руководство пользователя

Страница: 259 / 306

7.4 Printing Report/List
259
7
Daily Control
HD Full Cause: Print is disabled because Hard Disk Drive space is
insufficient.
Action: Decrease the number of pages to be printed by
means of such as dividing the print data, or
printing by one set when attempting to print
multiple sets.
PS Decompose ERR Cause: An error occurred during PostScript processing.
Action: Take one of the following actions.
●
When [Print Mode] is set to [High Resolution], set
it to [High Quality]. If the status is not still
improved, set it to [Standard].
●
Increase the capacity of print page buffer.
●
Increase memory used by PS.
For information about [Print Mode], refer to the On-line
Help of the printer driver.
FIFO Empty ERR Cause: An error occurred during image processing.
Action: Set [Print Mode] to [High Quality], and instruct print
again. If the problem still persists, print in Print
Page Mode.
For information about [Print Mode] and [Print Page
Mode], refer to the On-line Help for the printer driver.
PJL Syntax Error Cause: A syntax error of the PJL command occurred.
Action: Check settings for print or correct the PJL
command.
Invalid Page Margin Cause: Page margin value is too large for valid coordinate
area of HP-GL or HP-GL/2.
Action: Lower the page margin value and instruct print
again.
HP-GL/2 Memory Overflow Cause: Paper size may not be determined correctly
because the received data exceeds the HP-GL/
2 spool size.
Action:
●
Wait until processing of stored print data is
finished, and instruct print again.
●
It is recommended to assign more HP-GL or HP-GL/2
auto layout memory, or install a Hard Disk Drive.
Page without Image Draw
Data
Cause: No drawing data exists in the HP-GL or HP-GL/2
print data.
Action: Check the print data.
Error Message Cause and Action