TallyGenicom 8124, Руководство пользователя

Страница: 121 / 306

3.3 Printing Non-Standard/Long Paper Sizes
121
3
Printing
4
Insert long-size paper with the side to
be printed facing down through the
bottom of the paper holder, and push it
right to the end while aligning it with the
paper guide.
5
Insert the end of the paper to the paper
holder with the edge curled as shown in
the diagram.
6
Adjust the paper guide of Tray 5
(bypass tray) to fit the paper that is
loaded.
●
To prevent paper jams, remove the output paper from
the tray one sheet at a time.
●
After printing, be sure to remove the Banner Tray and
keep it in a safe place.
For Trays 1 to 4
The procedure for loading non-standard paper sizes into Trays 1 to 4 is the same
as the procedure for loading paper of standard sizes. Refer to “4.2.1 Loading
paper into Trays 1 to 4” (P.151).
Printed side