Takeuchi TB175W, Руководство оператора

Страница: 69 / 221

67
CONTROLS
Accessories
3. For more stations, repeat the steps (1) and
(2) above.
• If the preset button on which a station
has been set to is pressed and held
for two seconds or more, the preset
information will be modified.
• If the stored information is erased during
battery replacement on the vehicle,
set the stations again to the preset
buttons.
• Each preset button can store information
on one FM station and one AM
station.
Auto storing
Press the AST button for two seconds or
more while playing the radio. The radio starts
seeking the audible stations within the band
selected, store the information on the stations
obtained into memory, and assign each
preset button (1 to 6) a station.
Note: The previous station setting stored in
memory will be overwritten. If the arrangement
of the preset buttons to the corresponding
stations is not desirable, try the “Presetting
stations” described above.
AUX audio connection
�
Connect a portable audio player and
listen to your favorite music.
�
Plug a patch cord (without resistor) into the
headphone jack of the audio player.
�
Plug a stereo mini plug (3.5 mm) into the
AUX-IN jack on the radio.
�
To listen to the audio player, press the AUX
button. (The AUX display appears and the
frequency display is changed to the clock
display.)
�
To return to the radio, press the AUX button
again.
�
When connecting, adjust the sound
volume level of the audio player so that it
is same as that of the radio.
�
Adjust the sound volume of the audio
player by using the volume control buttons
on the radio.
�
Do not connect a device with a larger
output compared with a portable audio
player.
Setting the clock time
�
Be sure that the time is displayed on the
LCD. If not, press the AUX button to display
the time.
�
Use the tune button to set the minute.
Use the tune button to set the hour.
�
To set the minute digits to “00” when they
are from “55” to “59” or from “01” to “05”,
press the ZERO button.
Resetting the radio
If there are any problems, such as the
abnormal display of frequency or failure of
selection, reset the radio by pressing the
power button and the ZERO button together.
Note that the memory containing the clock
setting and the channel setting is cleared
after reset.
AUOC002