22
ADJUSTING THE HEIGHT OF THE SPLITTING WEDGE AND REPLACING THE SPLITTING
WEDGE
Lift or lower the splitting wedge by pressing the yellow buttons on the main control handle. By
doing so you place the splitting wedge to the center of the log and ensure the optimum size of
the firewood.
It is best to lift or lower the splitting wedge when the splitting chute is empty or when the
splitting cylinder starts to move.
The lifting mechanism of the splitting wedge also allows gradual movement of the splitting
wedge up/down during splitting operation. If the wood gets stuck under the splitting wedge,
remove the wood to prevent damage to the lifting mechanism.
To replace the splitting wedge:
1. Clean the space under the blades;
2. remove the bolt at the top of the splitting wedge;
3. lower the splitting wedge to the end, thereby releasing the lifting mechanism;
4. pull out the splitting wedge and replace it with a new one;
5. then slightly lift the mechanism to fasten the splitting wedge in the operating position.
6.5. PROPER USE OF SPLITTING WEDGE
To ensure the durability of your splitting wedge, follow these instructions:
1. The splitting wedge is designed exclusively for wood splitting up to the max. diameter specified
on your RCA machine.
2. The log in the splitting chute must always be longitudinally directed towards the splitting
wedge. This prevents unnecessary overloads and downtime.
Содержание RCA 330 JOY
Страница 40: ...40 ...