manualshive.com logo in svg

Tait TB8100, Руководство по установке, Страница: 2 / 20

Поделиться
Скачать
Tait TB8100 Скачать руководство пользователя страница 2

 

Page 2 of 20

TN-906-AN

© Tait Electronics Limited 21 December 2005

Contents

1

The Purpose of an APS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

2

Supported APS Units and their Main Features . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Units Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.2 Main Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3

Physical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

4

Configuring the Service Kit and Base Station  . . . . . . . . . . . . . . . . . . . . . . . .  9

4.1 Configuring the Service Kit for Dial-in via an APS  . . . . . . . . . . . . . . . . . . . . . . . 9

4.2 Configuring the Service Kit for a Direct Connection via an APS  . . . . . . . . . . . . 11

4.3 Configuring the Base Station to Dial Out to an Alarm Center  . . . . . . . . . . . . . . 11

5

Configuring the APS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

5.1 Ensuring the Security of Configuration Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.2 Configuring the Set-up Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.3 Configuring the Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6

Testing the Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

7

Essential Modem Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18

8

Known Issues or Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18

Document Conventions

‘Configure > Communications > Alarm Center’ means ‘click the 
Configure icon on the toolbar, then in the navigation pane find the 
Communications group, and select Alarm Center from it’. 

Associated Documentation

TN-742: Remotely Monitoring and Configuring the TB8100 Base Station.

TB8100 Installation and Operation Manual (MBA-00005-xx).

TB8100 Service Kit User’s Manual (MBA-00010-xx) and online Help.

TB8100 Alarm Center User’s Manual (MB8100-80-00-806) and online Help.

Your APS User’s Guide.

Содержание TB8100





















Отзывы:

Нет отзывов