3.6.2.3 Flush-mounted loudspeaker of N-series
conference unit
a. Cut holes in the table according to positioning
diagram (figure 3.26);
Figure 3.26 Positioning diagram of N-series
conference unit speaker (unit: mm)
b. Align the fixing plates of the loudspeaker to the
auxiliary installation shell and put them into the hole;
c. Fix the fixing plates with M3 screws;
Figure 3.27 Installation diagram of the fixing plates of the
N-series conference unit loudspeaker
d. Take off the auxiliary installation shell;
Figure 3.28 Diagram of the finished installation of the
fixing plates of the N-series conference unit loudspeaker
e. Put the flush-mounted loudspeaker into the fixing
plates and buckle it.
Figure 3.29 Diagram of the finished installation of the
N-series conference unit loudspeaker
65
