3.2.2 Installation
E-series discussion unit can be installed as tabletop or
flush-mounted.
For flush-mounting:
a. Make a recess in the table according to the
dimensions in figure 3.2 (unit: mm);
b. Drill two Ø 4 mm screw holes at the bottom of the
recess according to figure 3.2. The distance
between the centers of the screw holes is 80 mm;
c. Run the two cables on the back of the discussion
unit according to the mounting feasibilities
existing on-site;
d. Put the discussion unit into the recess and fix it
with screws from the bottom. The length of the
screws is based on the thickness of the table.
Figure 3.2 Installation diagram of E-series discussion unit flush-mounted (unit: mm)
28
