2.1.3 Connection
2.1.3.1 To contribution units
HCS-3600 series CMU has 3 outlet (6P-DIN) trunk-line
cable connectors for contribution units. HCS-3600
series contribution units are equipped with a 6P-DIN
cable with a standard male connector.
When connecting the main unit to the contribution units,
just connect the 6P-DIN male connector of the first unit
to the output of the main unit.
For a longer distance between the contribution unit and
the CMU/EMU, a CBL6PS extension cable is used.
One end of this cable is equipped with a 6P-DIN male
connector, the opposite end is equipped with a 6P-DIN
female connector. Just connect the female connector of
the cable to the conference unit, and connect the male
connector to the output of the main unit.
Figure 2.4 CMU connected to conference units
2.1.3.2 To peripheral devices
HCS-3600 series CMU has multiple peripheral device
interfaces. The audio signal input/output can be carried
out if different peripheral devices are installed. See
figure 2.5.
2.1.3.3 Expansion connection between CMUs
More than one CMU can be connected via HUB into
the LAN to extend the system capacity. A multi-CMU +
EMU(s) system controls up to 256 discussion units or
4096 voting units per multi-CMU system. See figure
2.6.
12
