64
3.6.2.2 Installation of terminating panels for N-series conference unit
a. Put the terminating panel marked “L” at the left side
and align it with the installed conference unit. Fix it
with the black M3 Phillips screws;
b. Put the terminating panel marked “R” at the right
side and align it with the installed conference unit.
Fix it with the black M3 Phillips screws;
c. Stick PVC to them.
Figure 3.24 Installation diagram of the N-series terminating panels
Figure 3.25 Diagram showing the finished installation of the N series conference units
Note:
)
HEmbedded decorative labHel must be ordered
separately;
)
If needed, Hprotective coverHs with different
dimensions can also be ordered separately
according to actual installation.
