60
programming the remote
erasing all
commands for
one device
erasing all
commands for all
devices
remote control
warning
To erase ALL learnt commands for one device:
1. Press the
REMOTE SELECTION
key for the appropriate device
and the
ok
key simultaneously until the status LED turns
yellow and chosen
REMOTE SELECTION
key is lit.
2. Press and hold the
light
key. The status LED will flash red five
times and the selected devices LED will turn off. Release the
light
key; the status LED will flash green twice then turn a
steady yellow and the selected device key LED will turn on
again.
3. To finish, press and hold the
REMOTE SELECTION
and
ok
keys simultaneously. The
REMOTE SELECTION
key LED will
go out and the status LED will flash yellow twice then go out.
To erase ALL learnt commands for ALL devices:
1. Press and hold the
tv REMOTE SELECTION
and
light
keys
simultaneously. The status LED will flash red 10 times, then
green once, yellow once and turn off
(1)
.
You will, from time to time, have to replace the batteries in your
remote. During the battery changing operation the remote will
remember your programmed commands, but you should avoid
pressing any key on the remote during battery changing
as you may lose all your stored settings.
1. Caution – this will erase every function that you have programmed into the remote
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:15 PM Page 60
