49
software upgrades
software
upgrades
One of the most flexible aspects of the DVD32R is that both the micro-controller
and Digital Signal Processor software are stored in re-programmable memory. This
memory can be re-programmed using a suitably equipped PC connected via the
TAGtronic Programming Cable (optional - not included with the DVD32R).
Details of future upgrades are published on
www.tagmclaren.com
.
In order to upgrade your DVD32R with the latest software you need to have the
following items:
1.
A suitably equipped PC to interface with the DVD32R.
Visit
www.tagmclaren.com
or contact our helpdesk to find out if
your PC is suitable.
2.
The TAGtronic Programming Cable - not included with the
DVD32R. The cable can be ordered from the on-line shopping
section of
www.tagmclaren.com
.
3.
The TAGtronic Upgrade Wizard Version v2.10 or later.
This can be downloaded free of charge from
www.tagmclaren.com
.
4.
The DVD32R software you would like to download to your
DVD32R. This can also be downloaded free of charge from
www.tagmclaren.com
.
Once you have installed the TAGtronic Upgrade Wizard on your PC, download the
latest DVD32R software (and register it with the Upgrade Wizard by double-clicking
on it), you can load it into your DVD32R.
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:14 PM Page 49