T
A
Gtronic
Synchronisation
Link (T
2
Link)
switching on
If you use the DVD32R with a TAG McLaren AV processor, offering
the TAGtronic Sync Link, you can connect the
T
2
LINK IN
put with the
appropriate connector at the processor
(1)
, using a well-screened high-
quality analog interconnect, such as our F3-10-ANA.
The TAGtronic Sync Link improves the sound quality by reducing the
timing errors (jitter) to a minimum. The DVD32R will also work
without the TAGtronic Sync Link connected, albeit with a somewhat
lesser perfomance, allowing you to activate the TAGtronic Link at a
later time.
If you are using the TAGtronic Sync Link
Remove the shorting plug when using the TAGtronic
Synchronisation Link, otherwise the link will not function.
If you are not using the TAGtronic Sync Link
Your DVD32R is shipped with a shorting plug fitted to
T
2
LINK IN
. For best sound quality, we recommend that
the shorting plug be left in place if no TAGtronic
Synchronisation Link connection is made.
Press the power button in. The blue power LED will come on
(2)
,
followed by
SELFTEST
, then the software version, shown on the front
panel display.
16
connecting
1. For details see the AV processor’s operating manual
2. If the DVD32R is linked with a TAG McLaren AV processor via the TAGtronic
Communications Bus, and its
Blue LED State When Display Off
setting is set to
Off
, the Blue LED will switch off when the display is switched off, so reducing
stray light levels when watching a movie. Please refer to the AV processor’s
manuals for details
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:14 PM Page 16