55
programming the remote
programming
the remote
The remote comes pre-programmed and ready to use for the
following TAG McLaren Audio products:
• our range of AV processors
• our range of home cinema amplifiers
• our range of DVD players
Other devices which are not pre-programmed to work with the
remote will need to be ‘learnt’. To program the remote for other
devices, you will need the original remote for the unit you wish to
control.
Some devices (other than those listed above) may partially work
with the remote as supplied. To check this, select the desired unit
using one of the
REMOTE SELECTION
keys and try pressing a few
of the keys. If the device responds as expected, you may only
need to edit the set-up for that unit by programming one or two
keys, as explained on the following pages, otherwise you will
need to program the remote for all commands.
cd
dvd
amp
av
R E M O T E S E L E C T I O N
sat
tv
vcr
ld
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:14 PM Page 55