show
A
V32R
status
relay standby
commands
If your video device is directly connected to your DVD32R (or
routed through the AV32R
bp-192
without using the on-
screen display) the Enhanced TAGtronic Communications Bus can
be used to convey on-screen information from the AV32R
bp-192
to
the DVD32R. When this feature is enabled
(1)
, on-screen
information from the AV32R
bp-192
is overlaid onto the video signal
in the DVD32R. The AV32R
bp-192
transmits status messages (press
ok
with the remote in
av
mode), volume and surround
information. It does not send the setup screens of the AV32R
bp-192
.
The DVD32R can be configured to relay standby commands onto
the TAGtronic Bus. This provides a means of putting all products
into standby using a single press of
standby
. Similarly, all
products can be brought out of standby using the same key. If the
DVD32R is configured for
auto-standby
(2)
, then this too will cause
a standby command to be relayed on to the bus.
35
T
A
Gtronic Communications Bus
1. This requires AV32R
bp-192
software version 3.70 or higher
2. Auto-standby puts the DVD32R into standby if it ‘idles’ for a user selectable time.
See
first time setup
in the DVD32R
setup
menu for details (on-screen)
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:14 PM Page 35