58
programming the remote
programming a
macro function
When using the macro functions, it can take up to 10 seconds to
transmit a 10-key sequence. You should keep the remote pointing
towards the appropriate unit while the commands are being
transmitted to ensure they are received correctly.
To program in a macro function:
1. Simultaneously press the
REMOTE SELECTION
key for the set
of macros you wish to program (
av
or
sat
) and the
mute
key. The learning status LED and the
REMOTE SELECTION
key will both turn red to indicate that the remote is in macro
learning mode
(1)
.
2. Press one of the macro keys
m1
to
m4
or
standby
to which
you wish to allocate the functions.
3. Press the keys for the commands (up to 10) you want stored
in the macro key
(2)
.
4. Press the
VIDEO +
(3)
key to store your selections. The
learning status LED and the
REMOTE SELECTION
key will
both flash red twice, then go out.
5. To use the macro, simply press the macro button.
m1
m2
m3
m4
light
cd
vcr
tv
ld
sat
dvd
tuner
md
aux
dab
+
+
---
---
V O L
V I D E O
cd
dvd
amp
av
R E M O T E S E L E C T I O N
sat
tv
vcr
ld
mute
1. The remote will stay in macro learning mode for 20 seconds, after which it will
return to normal operation mode if there have been no further key presses
2. You can select functions to control another unit as part of a macro by first
pressing the appropriate
REMOTE SELECTION
key before pressing the keys for
the desired functions. This
REMOTE SELECTION
key press counts as one of the
10 presses you may store in the macro key
3. This key is called
CH +
on some remotes
GRR00876.03-DVD32R UM v3.7.qxd 8/28/02 2:15 PM Page 58
