getting started
13
before you
start
positioning
We know you are keen to get your tuner T32R working. This section will have you
listening to your favourite station as quickly as possible, but to obtain optimum
performance you should spend a few moments studying these instructions.
Contained within are a series of easy-to-follow steps which will have you up and
running in the minimum of time. You will locate diagrams on pages 2, 3 which will
help you find your way around your T32R
(1)
.
1. Throughout this instruction manual
bold
print indicates the lettering that you will
find on the panels of your T32R and the Remote
2. There are many potential sources of low-level radio emission in your home.
Typical sources include: CD players, TVs, fluorescent lights, video-recorders,
digital equipment, computers and other radio receiving or transmitting
equipment. Your T32R is a very sensitive radio signal detector and, as such, can
pick up interference from other nearby equipment. You may need to move your
T32R or the interfering equipment to eliminate the problem. If you experience
difficulty with electrical interference, consider carefully what other equipment is
connected to the same mains electricity ring or spur circuit as your T32R
Make sure that all the components of your audio system are
disconnected from the AC supply whenever you change
any connections.
You should position your T32R away from sources of heat such
as radiators and out of direct sunlight. You should not place it
on top of units that generate a lot of heat such as a power
amplifier. You should also place the unit away from potential
sources of radio interference
(2)
. Also ensure that the front panel is
in clear view; this will assist in setting up and make the T32R
Remote more responsive.
*LASER*-T32R Manual v3.7x 8/29/02 12:13 PM Page 13
