calibration tone
Your T32R has a record level setting facility to help you record radio broadcasts
(1)
.
49
record level setting
1. Please ensure that you comply with your local copyright regulations if you record
radio broadcasts
2. Record level setting is not necessary for digital outputs, so Calibration is not
available in DAB mode
3. Please see page 36 for details on how to use the menu functions
This is a 400Hz tone, at a level which equates to 50 per cent
modulation, replaces the broadcast programme. This signal
(which is routed to the
AUDIO OUTPUT
sockets) can be used to set
the level controls of your recording equipment before making a
recording
(2)
.
Calibration tone is accessed under the
system
menu functions
(3)
.
Press
enter
to switch on,
cancel
to switch off the calibration tone.
When you switch off the calibration tone, your T32R returns to its
last setting. The calibration tone can also be switched on by
pressing the
store
key or button, then
0
key or button twice.
*LASER*-T32R Manual v3.7x 8/29/02 12:14 PM Page 49
