getting started
15
power
connection
switching on
standby
Whilst ensuring that the front panel power button is in its ‘off’
position, plug in the power cord into the socket at the rear of your
T32R. Connect the power cord to an AC outlet of the appropriate
voltage. Power up your complete hifi system.
Press the power button in. The blue power LED will come on,
the display window will light up and a few seconds later it
will show
SELFTEST TAG McLaren
, followed by the software
version number. The mute LED will illuminate briefly
(1)
.
The T32R has a standby mode, which can be entered by pressing
the
standby
key on the Remote or keeping the
muting
button on
the front fascia pressed for more than 3 seconds. The blue power
LED will dim and the display window will be switched off
(2)
.
Normal operation may be resumed by pressing any front panel
button or Remote key.
1. The output is muted when the power is switched on to allow all the voltages to
stabilize. This protects the internal components on your T32R, amplifier and
loudspeakers and prevents unpleasant switching noises disrupting your listening
experience
2. The T32R can be configured to show, at a user configurable display brightness,
the time and date. The T32R will temporarily show an error message if the time
was not set or no time was received via RDS (assuming the parameter
always set
from rds
was set to
on
).
standby
mono
muting
if width
hi-blend
*LASER*-T32R Manual v3.7x 8/29/02 12:13 PM Page 15
