Tadiran Telecom TGW4 SERIES, Руководство по настройке пользователя

Страница: 25 / 142

TGW4/8 Gateway Series for Aeonix User Configuration Manual
Tadiran Telecom (TTL) L.P. 13
2.3.2 Network Configuration
After login, click the Basic > Network tab to open the network configuration interface.
Figure 2-9
Network Configuration Interface
Table 2-3
Network Configuration Parameters
Note: * indicates mandatory parameters for Aeonix.
Name Description
*
Setup
Methods for obtaining an IP address:

Static IP: static IP address is used;

DHCP: use the dynamic host configuration protocol (DHCP) to obtain IP addresses
and other network parameters;

PPPoE: PPPoE service is used.
For Aeonix

Select Static IP
Username Enter an authentication user name if PPPoE service is selected, and there is no default
value.
Password Enter an authentication password if PPPoE service is selected, and there is no default
value.
*
IP address
If “Static IP” or “DHCP” is selected but an address fails to be obtained, the gateways
will use the IP address filled in here. If the gateways obtain an IP address through
DHCP, the system will display the current IP address automatically obtained from
DHCP. This parameter must be set due to no default value.
For Aeonix

In the IP address box, enter the TGW gateway IP address.