Tadiran Telecom TGW4 SERIES Скачать руководство пользователя страница 116

Страница: 116 / 142

High Availability Configuration Guide TGW4/8 Gateway Series for Aeonix

104

Tadiran Telecom (TTL) L.P

Appendix: VLAN Configuration

Virtual Local Area Network (VLAN) virtually divides a physical LAN into multiple broadcast domains.

Only hosts in the same VLAN can directly communicate without a router, so broadcast packets are

restricted to the same VLAN, improving network security (e.g, a data-only VLAN or voice-only VLAN).

VLAN technology identifies the VLAN information of a data packet by adding the VLAN tag field in the

Ethernet frame header.

When a gateway accesses a VLAN, configurations such as VLAN tags and priorities are required for the

gateway.

The following methods are used for configuring VLANs:



Manual configuration: Via a web-based GUI.

Restart is required after the configuration.



Automatic configuration: With Link Layer Discovery Protocol (LLDP) enabled. During startup the

TGW automatically obtains VLAN configuration information via an LLDAP message, adds VLAN

tag in packets it sends, and obtains network information such as IP address using the DHCP mode by

default.

The gateways support two VLAN modes: single VLANs and multi-service VLANs (including voice and

management VLANs). Manual mode is used to configure single and multi-service VLANs. Automatic

mode can configure only single VLANs.

5.1 Manual Configuration

5.1.1 Single VLAN

All services of the TGW are on the same VLAN, and the TGW receives only data packets carrying the

VLAN and includes the VLAN tag in all sent data packets. In the single VLAN mode, all TGW services

belong to the same VLAN. The TGW receives only data packets that carry the VLAN tag and includes the

VLAN tag in all sent data packets. In this mode, the physical network port of the TGW has no separate

address and shares the IP address of the VLAN interface.

Configuration

On the web interface, click

Network

, set the VLAN function to

, set

Mode

Single VLAN

, enter the

VLAN tag, and specify network information such as IP address or select

DHCP,

as shown in

Figure 5-3.

Содержание TGW4 SERIES















































































































































Результаты поиска

Содержание TGW4 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Tadiran Telecom TGW4 SERIES, Руководство по настройке пользователя

Результаты поиска

Содержание TGW4 SERIES

Отзывы:

Бренды по названию

Популярные бренды