Tadiran Telecom TGW4 SERIES Скачать руководство пользователя страница 127

Страница: 127 / 142

TGW4/8 Gateway Series for Aeonix High Availability Configuration Guide

Tadiran Telecom (TTL) L.P.

115

Appendix: High availability configuration

6.1 Overview

6.1.1 Function Definition

In the deployment of VoIP network, TGW4/8 Series Gateway supports

high availability

architecture

with

Primary-Standby

Active-Standby

and

Load balancing

modes.

Primary-Standby mode

In this mode, a backup SIP proxy server (referred to as SIP server) is configured. The gateway will

failover to the backup server automatically when the primary server fails. The gateway detects the

failure condition of the primary server by sending OPTIONS request to it.



If the gateway does not receive the response to OPTIONS request, it will failover to the backup server.



After failover to the backup server, the gateway will still send OPTIONS to the primary server all the same. It switches

back to the primary server once the response to the OPTIONS request is received.

For configuration procedure, see

Configuring Primary-Standby Mode

on page 117.

Active-Standby mode

In this mode, one SIP proxy server (referred as SIP server) functions as the primary server while other

SIP servers function as standby servers.

Either of the following conditions could trigger the failover operation of the gateway:



Not receiving response to the OPTIONS message from the current SIP server to which the gateway sends or receives

call traffic;



Not receiving response to the REGISTER/INVITE message from the current SIP server to which the gateway sends or

receives call traffic

The administrator can manually switchover the gateway from the current SIP server to the next

available one.

The gateway will redirect call traffic to the designated proxy server in response to the re-INVITE from

the server.

For configuration procedure, see

Configuring Active-Standby Mode

on page 119.

Load balancing mode (for Aeonix)

In this mode, the clustered SIP servers are all working in active status. Under the coarse grained scheme

all endpoints of a gateway are allowed to register on one of the designated servers and under the fine

grained scheme the endpoints of a gateway are allowed to register on multiple servers, according to the

Содержание TGW4 SERIES















































































































































Результаты поиска

Содержание TGW4 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Tadiran Telecom TGW4 SERIES, Руководство по настройке пользователя

Результаты поиска

Содержание TGW4 SERIES

Отзывы:

Бренды по названию

Популярные бренды