manualshive.com logo in svg

TacT Audio BOZ 216, Руководство пользователя

Поделиться
Скачать
TacT Audio BOZ 216 Скачать руководство пользователя страница 62

62

boz

lock menu 

< 

menu option

The LOCK menu is used to disable the remote control and front panel buttons of your BOZ sys-
tem.

1. 

Displays the Lock status. If Lock status is set to LOCKED, all the menu options, with the  

 

exception of this one, are disabled.

2. 

Use this field to enter the Lock password. 

3. 

Use these fields to enter the password code. 

4. 

After the password is entered, click on this option to LOCK or UNLOCK the unit. 

5. 

Click on this option to delete the number entered in the PSWD field. 

All units come with a factory preset password of “1234”. Use the rotary knob to enter the password. 
Place the cursor over number 1 and click on it. The number 1 will be displayed in the PSWD field. 
Repeat this for 2,3, and 4. When all four numbers are displayed (1234) place the cursor over the SET 
option and click on it. This will lock or unlock the unit.

Please note that this password is not intended to provide any security access to the system param-
eters. It is provided as a small protection against unintentional changes to the system parameters.

216/2200

Содержание BOZ 216





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды