TacT Audio BOZ 216, Руководство пользователя

Страница: 60 / 68

60
boz
display menu
<
menu option
The DISPLAY menu allows you to change the visual properties of the displays. Changes made to
the BOZ-216 control unit’s display properties are also reflected in each BOZ-2200’s display.
1. Place the cursor over this menu option to adjust the display’s “ON” brightness. The
brightness level can be set from 1 to 16, where 16 is displayed as MAX. Note that this
brightness level will affect all the BOZ-2200 modules connected to the BOZ-216 control
unit.
2. Use this field to adjust the “OFF” brightness. The value of OFF brightness can be set from
0 to 16, where 0 is displayed as OFF and 16 is displayed as MAX.
3. Use this field to enable or disable the display timer.
4. Use this field to set the display timer timeout value. This value is set in seconds and can
be set from 5 to 20 seconds.
5. Use this field to turn ON and OFF the display screen saver. The screen saver displays an
animated version of the master level.
Let us consider the following example:
Note that if the Timeout option is set to “ON”, it is indicating that the display timer is enabled. After
10 seconds (Time out in sec: 10) the display brightness will be set to level 1 – this will affect the
displays of all BOZ-2200 modules. The display will stay in this condition until any command either
by the rotary knob or by IR is initiated. The initiated command will turn the display back to the
brightness level as set by the ON Brightness option.
216/2200