TacT Audio BOZ 216, Руководство пользователя

Страница: 41 / 68

41
This menu serves
as your conduit to
manipulating the
individual amplifier
modules.
PING:
The ping command
here serves the same
purpose as it did on
the First Screen. It is
included here again to
assist you in selecting
the proper module for
specific manipulation.
amps menu
Use this screen to enter individual BOZ-2200 module screens. You can also ping all of the amps to
check for the total number of connected amplifiers.
Highlight the desired Amp with the “Left” and “Right” navigation buttons on the remote. Select it
by pressing the ENTER button. This will open an Amp setup display screen. This can also be done
from the front panel with the navigation knob.
1. Amp selection. Using the rotary control knob highlight the desired amplifier and push
the rotary knob to enter selected amplifier menu.
2. PING command. Highlight the PING option and then push rotary knob to ping all of the
BOZ-2200 modules connected to BOZ-216 controller. All connected and powered ampli-
fier modules will respond by briefly displaying their number on their front panel displays.
3. Highlight Back and push the rotary control knob to go back to the first screen.
th
e
A
M
P
S
o
p
tio
n