TacT Audio BOZ 216, Руководство пользователя

Страница: 18 / 68

18
boz - 2200 back panel
1. Right channel output - negative terminal. Connect this output to the corresponding
loudspeaker input.
2. Right channel output - positive terminal. Connect this output to the corresponding loud-
speaker input.
3. Digital input 1. This is the modules AES/EBU digital input.
4. Digital input 2. This is the module’s SPDIF digital input.
5. External clock input.
6. RS-232 input. Using the included RS232 cable, connect to a selected BOZ-216 I/O Block.
7. Power connector. Using the included power cable, connect to a selected BOZ-216 I/O
Block.
8. Digital output 1. This an AES/EBU digital pass-through signal.
9. Digital output 2. This an SPDIF digital pass-through signal.
10. Left channel output - negative terminal. Connect this output to the corresponding loud-
speaker input.
11. Left channel output - positive terminal. Connect this output to the corresponding loud-
speaker input.
boz
Make sure that a BOZ-
2200 module’s RS-232
input and Power Con-
nector are connected
to corresponding
connectors within the
same Power Block on
the BOZ-216.
The digital pass-
through is what is
called an electrically
repeated output. It
passes through exactly
what was put into
the inputs. The input
is available for pass-
through on both the
AES/EBU and SPDIF
digital pass-through
outputs on the back
panel; you pick which
one you want to use.
The pass-through
signals is not affected
by any internal signal
processing, such as
level, polarity, etc...
216/2200 216/2200