manualshive.com logo in svg

TacT Audio BOZ 216, Руководство пользователя

Поделиться
Скачать
TacT Audio BOZ 216 Скачать руководство пользователя страница 42

42

BOZ-2200 ON/OFF:
Although the BOZ-
2200’s all have front 
panel power buttons, 
using the AMP menu is 
the recommended way 
to individually turn the 
modules ON/OFF. 

boz

amp menu 

< 

amps option

Use this screen to set individual amplifier parameters. Each BOZ-2200 amplifier module connected 
to the BOZ-216 control unit has its own set of parameters that are controlled by this menu.

Use the “Left” and “Right” navigational buttons to highlight an option. Pressing ENTER on the re-
mote will open a menu. This can also be done from the front panel with the Navigational knob.

1. 

Indicates the amplifier number. The amplifier number is determined by the connector  

 

number, or I/O Block on the back of BOZ-216 to which the amplifier is connected. 

2. 

Amplifier power status. If this particular amplifier is not powered up or the amplifier is  

 

not connected, this field will display OFF. If the amplifier power is turned ON this field  

 

will display ON. To turn the selected BOZ-2200 ON/OFF, position the cursor over this field  

 

and CLICK.

3. 

Displays the selected digital input. Note that the BOZ-2200 modules (amplifiers) each  

 

have two digital inputs. Number 1 refers to the balanced XLR AES/EBU input, and num- 

 

ber 2 refers to the single ended RCA-SPDIF input. To select the desired input, position the  

 

cursor over this field and push the rotary control knob to toggle the input selection  

 

between 1 and 2. 

4. 

External Clock. Place the cursor over this field and push the rotary knob to enable/dis- 

 

able the external clock  selection. Note that if EXTCLK is set to ON and the amplifier de- 

 

tects that there is no external clock present, the ExtClk light on the front of BOZ-2200  

 

module will start blinking. If the clock is detected the light will stay ON. 

5. 

Click on this option to enter the amplifier DELAY time screen. 

6. 

Click on this option to enter the amplifier LEVEL balancing screen. 

7. 

Click on this option to enter the amplifier POLARITY selection screen. 

8. 

Click on this option to enter the amplifier InOut selection screen. 

9. 

Click on this option to enter the amplifier OPTION selection screen. 

10. 

Click on this option to enter the amplifier MODE selection screen. 

11. 

Click on this option to enter the amplifier CRO selection screen. 

12. 

Click on this option to enter the amplifier ParEq selection screen. 

13. 

Click on this option to enter the amplifier RCS selection screen. 

216/2200

Содержание BOZ 216





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды