TacT Audio BOZ 216, Руководство пользователя

Страница: 48 / 68

48
boz
options menu
<
amps option
Use this screen to set a BOZ-2200’s options. A unique set of amplifier options is assigned to each
amplifier module connected to the BOZ-216 control unit.
To change a setting, position the cursor over the desired property and CLICK the rotary control
knob. Depending upon the property, you will be able to either toggle between options or use the
rotary control knob to incrementally decrease or increase a numerical value.
1. Indicates the amplifier number. The amplifier number is determined by the connector
number on the back of the BOZ-216 to which the amplifier in question is connected.
2. This option is used to control the amplifier’s front panel display. CLICK the rotary knob to
toggle between “Fs” and “LEVEL”. When “Fs” is selected, the display will show input signal
sampling frequency. If there is no signal detected “---” will be displayed. When “LEVEL” is
selected, the display will show the amplifier’s level.
3. This option sets the peak detector threshold. This value can be set from 0 dB to -99.9 dB.
To completely turn it of go one step past 0 dB to display “---”.
4. Use this option to set amplifier’s gain. The gain can be set from 0 dB to 18.0 dB in incre-
ments of 0.1 dB.
Note that this is digital gain and that it will digitally amplify you audio signal. This feature
is very useful for listening to CD’s that are not fully modulated. If the CD is not fully
modulated, increasing the amplifier’s gain will compensate for loss of loudness due to
partial CD modulation. If the CD is fully modulated, then increasing the amplifier gain
will result in occasional signal clipping.
5. Click on this option to enter the external clock menu. This option displays the current
external clock selection.
6. Highlight Back and push the rotary control knob to go back to the first screen.
216/2200