TacT Audio BOZ 216, Руководство пользователя

Страница: 24 / 68

24
boz boz boz
speaker configurations
Passive Setup:
Crossovers are handled
within the physical
speakers.
Active Setup:
Crossovers are handled
digitally by the ampli-
fication system.
+
-
+
-
The modular design of the BOZ system means that you can configure it to virtually any active or
passive speaker configuration.
If you are using two or more BOZ-2200 amplifier modules, and your speakers allow for multi-amp-
ing, you can configure the system to run in bi-amped, tri-amped mode and even further multi-
amped configurations. This type of setup allows for one amplifier channel to drive a specific driver
or frequency region.
Active and Passive Configurations
The system with its standard features (the crossover package is not standard) can be configured to
a maximum of 16 channels of passive amplification in up to 8 different groups, or zones.
In addition, with its advanced DSP control, the BOZ-216 can enable digital crossovers (high-, low-,
and band-pass), making it possible to configure the BOZ-2200 amplifiers to virtually any system.
With the addition of the SPCRO-CRO (software programmed crossovers) the system can be config-
ured to support 16 channels of active amplification in up to 8 different groups, or zones.
Normal Operation
Each BOZ-2200 amplifier module has one pair of high quality speaker terminals. These terminals
will accept both spade- and banana-plugs. When connecting your speakers, please make sure that
the RED/HOT terminal is connected to your speaker’s POSITIVE terminal and that the BLACK/COLD
terminal is connected to your speaker’s NEGATIVE terminal.
+
-
216/2200 216/2200 216/2200