Page 33
CAUTION: Unplug the vacuum cleaner before servicing
1. Remove the four (4) screws securing the nozzle cover (Fig. A) and remove the cover (Fig. B.)
2. Remove the two (2) screws securing the heght adjust assembly (Fig. C) and remove the assembly.
3. Replace the assembly. Be sure to line up the arrows on the top of the height adjust assembly as shown
in Fig. D and secure with the two screws.
4. Install nozzle cover and base plate.
II. Maintenance and Repairs
S. Replacing the Height Adjust Assembly
Fig. A
Fig. B
Fig. C
Fig. D
