Taco 00e Series, Инструкция по установке и эксплуатации

Страница: 9 / 56

-9-
10. SETUP AND OPERATION:
10.1 Control Panel Layout
1. Bar Graph of Values
2. Numerical Display of Values
3. Unit Display of the Currently Selected
(Watts, Head Setting, Flow, or Speed)
4.
Selected Mode
(Automatic, Proportional Pressure, Constant Pressure,
Constant Speed and Night Setback)
5. [
+
] Button
6. [
3
] Button
7. [
–
] Button
10.2 Switching the Pump On and Off
When the pump is powered for the first time, it operates with the factory default settings in automatic mode.
To switch the pump off, press and hold the [
–
] key for 5 seconds, until OFF is shown on the display. When the pump
is switched off, the numerical display shows OFF.
To turn the pump on, press the [
–
] key briefly.
10.3 Pump Functions
[–] Key
Short press:
• Scrolling through parameters downwards, not changing parameter values.
• Scrolling through modes downwards when mode selection is selected.
• Changing parameters downwards when setting parameter values.
Long press:
• 3 seconds together with [
+
] key to select night setback mode.
• 5 seconds to switch off the pump.
• 5 seconds together with [
3
] and [
+
] keys to restore pump to factory default settings.
[
3
] Key
Short press:
• To confirm currently selected values of both mode and parameter.
Long press:
• 3 seconds to enable mode selection.
• 5 seconds together with long press on [
+
] and [
–
] keys to restore pump to factory default settings.
3s
3s
5s
ECM HIGH-EFFICIENCY CIRCULATOR
00
e
series
®
W
FT
GPM
xRPM
1
3 2
4
7 6 5