T-Fal P31052, Руководство пользователя

Страница: 9 / 150

5
EN
• Press down on the central section and turn the valve to line
up the position with the marker (L)
- Fig 5
• Remove the valve.
To replace the operating valve
• Fit the operating valve, lining up the
with the marker
(L).
• Press down on the central section and then turn to the
required position
- Fig 7
.
Using for the first time
• Fill the pot with 1/2 water. Add 4 tablespoons of
baking soda.
• Put the operating valve (A) in place on the steam
release outlet (B)
- Fig. 5
.
• Position the symbol
1
on the valve (A) opposite the
marker (L)
- Fig 7
.
• Close the pressure cooker.
• Place the pressure cooker on a heat source set to
maximum power.
• When steam begins to exit the valve
Fig 12
, turn
down the heat source and set a timer to 20 min.
• After 20 min., turn off your heat source.
To release the steam
• Position the symbol
on the valve (A) opposite the
marker (L).
• Rinse your pressure cooker.
To replace the operating valve
• Fit the operating valve, lining up the
with the
marker (L).
• Press down on the central section and then turn to
the required position.
Cooking
Before cooking
• Before each use, remove the operating valve (A) (see
section "Using the operating valve")
- Fig. 5
. Check
these by holding them up to the light, making sure
the steam release outlet is not clogged
- Fig. 11
.
If necessary, clean with a tooth pick - Fig. 11bis .
..
..
..
To make blackening
of aluminium
disappear from
already used
products : repeat
"first use"
instructions with
baking soda.