SystemAir 303612-42, Руководство по эксплуатации

Страница: 19 / 31

9.2 Temperaturre control (P-Controller) 2.01
9.2.1 Setting for operation as Temperature controller
%
set
0 100
R4
08.02.2008
v_set_pxet.VSD
potentiometer inside
(DIP 2 = OFF)
or
26.05.2008
v_pxet_q_aussen
_pot.VSD
potentiometer outside
(DIP 2 = ON)
set
Setpoint setting alternatively by “ potentiometer inside ” (DIP 2 =
|
OFF
|
) or “ potenti-
ometer outside ” (DIP 2 =
|
ON
|
)
For control with active sensors (0 - 10 V, 4 - 20 mA)
Setting range: 0 - 100 % measuring range of sensor
For Temperature control with passive sensors TF.. (KTY)
Setting range: 0 - 100 % -26...76 ° C (measuring range of controller)
The enclosed scale for type TF.. temperature sensors can be attached
above the potentiometer.
28.05.2008
v_pxet_q_skala_temp.VSD
set [% ] 0 10 20 30 40 50 60 70 80 90 100
[C°] -26.0 -15.8 -5.6 4.6 14.8 25.0 35.2 45.4 55.6 65.8 76.0
Scale 0 - 100 % -26...76 ° C for Temperature control with passive sensors TF.. (KTY)
set
[%]
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
[ ° C] -26.0 -20.9 -15.8 -10.7 -5.6 -0.5 4.6 9.7 14.8 19.9 25.0 30.1 35.2 40.3 45.4 50.5 55.6 60.7 65.8 70.9 76.0
20.03.2008
v_pand_pxet.VSD
R5
%
Pband
5 30
Pband
Pband
Narrow control range = Short control times
Wide control range = Longer control times and more stable control
For control with active sensors (0 - 10 V, 4 - 20 mA)
Setting range: 5 - 30 % 5 - 30 % measuring range of sensor
For Temperature control with passive sensors TF.. (KTY)
Setting range: 5 - 30 % 5.1 - 30.6 K
08.02.2008
v_nmin_pxet.VSD
%
n-min
0 100
R6
n-min
Minimum output voltage (basic speed)
Setting range: 0 - 100 % ( “ n-min ” takes priority if over “ n-max ” )
08.02.2008
v_nmax_pxet.VSD
%
n-max
0 100
R
7
n-max
Maximal output voltage (speed limiter)
Setting range: 100 % - “ n-min ”
Operating Instructions RETP6 / RETP10 Setting for operation
L-BAL-E082-GB 1237 Index 002 Part.-No. 00163339-GB
19/31