Type:
Integer, {enabled=1, disabled=2}
Access:
Read-Write
This object sets or returns whether the MPS Agent should transmit
authenticationFailure
traps when
receiving SNMP messages with an incorrect community string. This setting is stored in non-volatile
memory, and the default setting is enabled.
Object Name:
snmpEngineID
OID:
1.3.6.1.6.3.10.2.1.1
Type:
Octet String
Access:
Read-Only
This is the uniquely defined snmpEngineID used for SNMPv3 identification and localization. This object
is only accessible when using SNMPv3 messages.
Object Name:
snmpEngineBoots
OID:
1.3.6.1.6.3.10.2.1.2
Type:
Integer
Access:
Read-Only
This is the number of times the SNMP engine has booted. This parameter is used for SNMPv3 message
authentication. Message authentication requires messages include the proper snmpEngineBoots
parameter from the target device to prevent message replay attacks. This object is only accessible when
using SNMPv3 messages.
Object Name:
snmpEngineTime
OID:
1.3.6.1.6.3.10.2.1.3
Type:
Integer
Access:
Read-Only
This is the time since the SNMP engine last booted. This parameter is used for SNMPv3 message
authentication. Message authentication requires messages include a recent snmpEngineTime
parameter (within the last 150 seconds) from the target device to prevent message replay attacks. This
object is only accessible when using SNMPv3 messages.
Object Name:
snmpEngineMaxMessageSize
OID:
1.3.6.1.6.3.10.2.1.4
Type:
Integer
Access:
Read-Only
This is maximum messages size (in bytes) that can be sent or received by the MPS SNMP engine. This
object is only accessible when using SNMPv3 messages.
Содержание MPPS-4000-1U
Страница 7: ...Figure C Control Page in Web Interface...
