SynOptics SYNBIOSIS aCOLyte3, Руководство пользователя

Страница: 62 / 110

Creating a new batch
Accepting the batch design
Once you have accepted a batch for use in Measurement mode (see Accepting the batch
design , above), you will not be able to change whether aCOLyte3 detects light or dark
colonies. However, you will be able to carry out a test measurement and change the settings
for the Reject Small Particles and Sensitivity sliders and the colony splitter before recording
the result (see
Test measurement and adjusting settings , page 72). You can also edit a result by
adjusting these settings after you have recorded it – see
Rejecting small particles in a result
,
page 84,
Changing the Sensitivity setting for a result
, page 85, and
Splitting colonies in a
result , page 85, for details. You can also change the colony markers and colors in
Measurement mode (see The Classification panel , page 33).
To confirm that you have completed the setup procedure and want to proceed to taking
measurements:
Press
Notes The button will be disabled until you have carried out all steps required for setting up the
batch. However, even if the button is enabled, you will prevented from accepting the batch if
you have not given the batch a name (see
Giving the batch a name
, page 25) or, if you are
using auto-incrementing plate identifiers (see
Selecting auto-incrementing plate identifiers
,
page 39), you have not set a template plate id (see Plate ID , page 48).
The Accept New Batch button is enabled to show that you
can
proceed to taking
measurements if you wish – you can still make further changes to the setup if required before
pressing the Accept New Batch button.
The next chapter in the Manual, Using Measurement Mode to count colonies , shows you how
to use aCOLyte3 to carry out colony counts; the chapter following that, Working with results ,
page 77, shows you how to view and edit the results, and then compile a report.
If you change your mind about creating the new batch:
Press
to abort the new batch – you will be asked to confirm that you want to do this.
56 aCOLyte3 User Manual