SynOptics SYNBIOSIS aCOLyte3, Руководство пользователя

Страница: 42 / 110

Creating a new batch
If the batch you are creating is based on another batch, the Configuration tab shows the
settings selected in the parent batch:
The green check marks show the settings selected in the parent batch – if the parent batch
uses manually entered parent plate identifiers, the Parent is using auto-increment will have a
red cross next to it, but its check box will be enabled.
To use the same configuration tab settings as in the parent batch:
Leave the Parent Batch check boxes unchanged.
Note If the Parent is using a plate list, you will need to create a new plate list for the new batch –
see
Selecting auto-incrementing plate identifiers
, page 39, for instructions.
If you do not want to use the same configuration tab settings as in the parent batch:
Uncheck the Parent Batch check box(es) for the settings you do not want to use – see
the references below for how to set independent configuration tab settings for the current
batch.
If you are creating a new batch from scratch, or have chosen not to use the parent batch
settings, you can choose to use:
l
Manual plate identifiers and dilutions
You will need to enter an identifier manually for each batch and, if required, manually
change the dilution.
See
Manually entered plate identifiers
, on the facing page, for how to choose this
option.
l
Auto-incrementing plate identifiers and manual dilutions
Automatic identifiers will be created for each plate as it is measured, and, if relevant,
you can manually change the dilution.
See Selecting auto-incrementing plate identifiers , page 39, for details.
36 aCOLyte3 User Manual