SynCardia Companion 2 Driver System, Руководство оператора

Страница: 53 / 134

SynCardia Systems, LLC
Companion 2 Driver System Operator Manual
Page 53 of 132
Once the TAH-t is confirmed to be running in a partial fill, full eject
mode, Alarm settings may be modified as indicated in
Chapter 14,
Alarms and Notifications, to be specific for the patient.
Once the TAH-t is fully supporting a patient, the average Cardiac
Output (Avg. CO) can be reset to display only relevant information
by selecting MENU, SETUP, and RESET AVG CO and confirming
the change (
Figure 8-15 ). The Avg. CO number is useful for
comparison to the instantaneous Cardiac Output display to see if
the current Cardiac Output is greater than or less than the hourly
average cardiac output.
Figure 8-15 – Reset Average Hourly Cardiac Output
8.2.6. Change to I.C.U. Mode
(1) Once the surgery is complete and the Driver parameters
have been properly adjusted to achieve partial fill, full eject,
the Driver MUST be changed to I.C.U. Mode.
(2) Select MENU, MODE, and I.C.U. MODE.
(3) Changing to I.C.U. Mode activates the audible alarms, limits
the minimum rate to 90 BPM and provides additional
protection against accidental adjustment of operating
parameters.
(4) No password is required to change from O.R. Mode to I.C.U.
Mode because there are more restrictions in I.C.U. Mode
than in O.R. Mode.