SynCardia Companion 2 Driver System, Руководство оператора

Страница: 111 / 134

SynCardia Systems, LLC
Companion 2 Driver System Operator Manual
Page 111 of 132
Chapter 19. Switching from Freedom Driver to Companion 2
Driver System
NOTE: The procedure described below to switch drivers is the same for both the
50cc TAH-t and 70cc TAH-t.
CAUTION
It is recommended to have two people switch from the Freedom Driver
to the Companion 2 Driver.
Make sure all items and accessories are available before exchanging
Drivers.
19.1 Materials
Prior to switching from the Freedom Driver to the Companion 2 Driver
System, assemble the following materials:
•
Companion 2 Driver with power ON
•
Velcro
•
Scissors
•
Wire Cutter tool from Patient Tool Kit
•
Male and Female CPC connectors and Wire Ties from Connector
Tool Kit
•
Driveline Retention Bag
•
Wire Tie Gun
Note: The female CPC connector is always inserted into the blue
Drivelines. The male CPC connector is always inserted into
the
red Drivelines.
19.2 Preparation for Driver Exchange
19.2.1 Prepare the Driver as indicated in Section 8.2.8 , Setup of
Backup Driver, including the System Check.
19.2.2 Connect the Companion Drivelines to the Driver using the
single Driveline connector.
19.2.3 Position the Driver that is ON next to the patient.