Call Management
61
Synapse SB67035 Deskset User’s Guide
Back to Contents
Call Management Using a Headset
You can use an AT&T DECT 6.0 cordless headset (shown in Figure 22) or a corded headset
with the Deskset. To register a cordless headset to your Synapse Deskset, see
“To register
the AT&T cordless headset:” on page 133
.
Figure 22. AT&T DECT 6.0 Cordless Headset
To use a headset:
From Idle mode or during a call using the corded handset or speakerphone, press
HEADSET
.
If you have a headset connected to the jack on the back of the Deskset, that
headset becomes active.
If you have an AT&T cordless headset registered to the Deskset, the cordless
headset becomes active.
To send audio from the headset to the Deskset speakerphone, press
SPEAKER
.
To send audio from the headset to the corded handset, lift the handset. If the
handset is already off hook, press
HEADSET
to send audio to the handset. While
the handset is off hook, you can press
HEADSET
again to return audio to the
headset.
To learn more about compatible AT&T DECT 6.0 cordless headsets, visit our web
site at
www.telephones.att.com/smb
or call
1 (888) 916-2007
. In
Canada, dial
1 (888) 883-2474
.
