Troubleshooting
166
Synapse SB67035 Deskset User’s Guide
Back to Contents
Caller ID is not working. The display shows
and a digit for the name, and the same digit
for the phone number.
Line Appearance Mode only — The Line Appearance key appears red for several seconds before the
Deskset rings and the incoming call screen appears.
Phone#
Probable Cause
Corrective Action
Your organization does not
subscribe to caller ID service
or you have DSL phone lines
without filters installed.
Caller ID is a subscription service. You must
subscribe to this service from your local
telephone service provider for this feature to
work on your phone.
The caller must be calling from an area that
supports caller ID.
Both you and your caller’s telephone companies
must use caller ID compatible equipment.
If you have DSL phone lines, confirm that you
have a DSL filter plugged in between each
Deskset and DSL wall jack. The DSL filter must be
plugged into the wall jack, not the Gateway.
Probable Cause
Corrective Action
The line is a shared fax/voice
line.
None. The line appears busy during the fax
detection period, during which the system
determines where to route the incoming call. If
the system detects incoming fax tones, it routes
the call to the fax machine. If no fax signal is
detected, your Deskset rings.
