3-7
FMT 3000 Hardware Reference Guide - Option Installation and Operation
This enclosure also supports slot reader and wand holder mounting brackets to the left- or
right-hand side of the unit.
Desk Stand
A steel desk mount stand (Figure 3-4) raises the unit at a 20 degree angle for desk top use and
provides a convenient method for developers to hold the unit. The stand is made from one
piece of steel and is open on all sides so that all cables are readily accessible.
The unit, with 3 bracket mounting screws (K) installed on the back (refer to
on
page 3-3), slides into the key-hole shaped slots on the desk stand. The case must then be
opened in order to install the 4th locking screw (K) to firmly secure the unit (as shown in
on page 3-4).
This stand also supports slot reader and wand holder mounting brackets on the left- or right-
hand sides of the unit.
Figure 3-4. Mounting the Unit on the Desk Stand
Left
Right
Top
Front
Bottom
Back
Bottom
Right Side
Install adhesive back rubber feet
on the bottom of the desk stand.