Symbol FMT 3000, Справочник по аппаратуре, Страница: 26 / 124

2-3
FMT 3000 Hardware Reference Manual - Installation
Single Unit Purchase Contents
Depending on the order, single unit purchases contain an FMT 3000 computer or an FMT
3000 computer with the digital I/O option installed and the following items:
t
Installation kit containing the following items:
s
Keylock
s
cable ties
s
cable tie restraint
s
mounting screws for bracket installation
s
spare wire jumpers for power option and clock speed configurations
s
ferrite filter
s
rubber feet for the back of the unit
s
hex stand-off nuts for DB9 connectors.
t
A complete list of installation kit items is provided in Chapter 3, Option Installation
and Operation .
Accessing the Interior of the Unit
The case is secured with a keylock at the top of the unit and hinges down for access to the
cabling and memory cards. The case seals against foam gasket material on the metal base.
Operation of the keylock is shown in
Figure 2-1 . The keylock's pawl slides under a tab in the
metal base when in the lock position. The key is supplied in the installation kit bag that ships
with the unit.
Two hinges connect the metal base pan of the unit to the plastic cover and provide 180 degree
rotation so that the cover may hang down when the unit is open while mounted on the wall.
Before using the unit, unlock the unit’s cover and connect a power source into the unit’s
power supply board (see
Powering the Unit on page 2-5). Also, open the unit to connect and
install various optional items and cables such as the Ethernet cable, slot reader cable, external
keyboard, mouse, digital I/O lines, VGA card, etc.