2-19
FMT 3000 Hardware Reference Manual - Installation
Figure 2-9. Power Management Setup
Note: Available options and format information for the selected item is
displayed in right hand area of the Power Management Setup screen.
All default settings are shown in Bold.
Item Options:
t
Power Management / APM:
Disabled, Enabled
t
Instant On Support:
Disabled, Enabled
t
Green PC Monitor Power State:
Disabled, Stand By, Suspend, Off
t
Doze Mode CPU Clock Speed:
Max, Max/2, Max/4, Stopped
t
Doze Mode Time Out:
Disabled, 1 sec., 4 sec., 8 sec., 16 sec.
t
Sleep Mode CPU Clock Speed:
Max, Max/2, Max/4, Stopped
t
Sleep Mode Time Out:
Disabled, 1 min. 2 min, 4 min, 6 min, 8 min,
12 min, 16 min.
t
Video Access as an Activity:
Disabled, Enabled
t
Video Power Down Mode:
Disabled, Stand By, Suspend
t
Hard Disk Power Down Mode:
Disabled, Stand By, Suspend
t
Hard Disk Time Out (Minute):
Disabled, (1 to 15)
t
LCD Standby Time Out (Minute): Disabled, (1 to 15)
t
Standby Time Out (Minute):
Disabled, (1 to 15)
t
Suspend Time Out (Minute):
Disabled, 5, 10, 15, 20, 30, 40, 60 (This option
must always be disabled)
t
Suspend DRAM Refresh Rate:
Disabled, 15 msec, 30 msec, 120 msec (This
option must always be disabled)
t
Resume with Modem Ring:
Disabled, Not Accessible
t
Suspend Warning Beeps:
Disabled, Not Accessible
t
Display Activity:
Ignore, Monitor
t
IRQ3:
Ignore, Monitor (COM2 IRQ)
t
IRQ4:
Ignore, Monitor (COM1 IRQ)
t
IRQ5:
Ignore, Monitor (PCMCIA IRQ)
t
IRQ7:
Ignore, Monitor
t
IRQ9:
Ignore, Monitor (Possible network IRQ)