1-5
FMT 3000 Hardware Reference Manual - Introduction
status signals allow for storing temporary buffers and for closing applications before
losing power.
t
The PC/104 VGA adapter card option allows the unit to use an external full screen
monitor or LCD touch screen display. The primary use of the unit’s PC/104
connector is for VGA card installation. The built-in 4 x 40 LCD display is
operational even when the VGA adapter is used. Using the VGA adapter, a pointing
device, keyboard and sufficient disk space, the unit will be capable of running
Windows applications.
t
Two AC power adapters options are available for standard US and European
voltages. The UL and CSA approved adapter accepts 90 - 120 VAC input (60 Hz)
and provides 24 VAC output. The VDE approved adapter accepts 230 VAC input
(50-60 Hz) through an IDE connector and provides 24 VAC output. Both adapters
are fitted with a two pin connector to connect directly to the unit’s power I/O board.
t
2 Megabyte SRAM PC Cards, pre-loaded with DataLight DOS or Microsoft MS-
DOS, are also available separately.