Symantec 4400 Series, Руководство по установке

Страница: 30 / 100

26 Appliance setup and initial system configuration
Displaying system information
The password displays. Record it and store in a secure location. Passwords
are case-sensitive.
14
Press e .
The following message displays on the LCD:
The Network is now configured.
Caution: Do not repeat this procedure to configure the second interface. Use
the SGMI or CLI to configure the second interface.
The LCD screen displays the system menu. After a period of inactivity, the
LCD screen then displays the time and status messages.
You can now configure the appliance using the Security Gateway
Management Interface (SGMI) or the Command-line Interface (CLI) from
the inside interface. See the
Symantec Clientless VPN Gateway 4400 Series
Administrator’s Guide for more information.
Displaying system information
Once you complete the initial network appliance setup the LCD screen enters a
monitoring mode that it remains in during normal system operations. When in
monitoring mode, the appliance LCD displays system information related to the
health and status of the appliance. This system updates approximately every
second. You can determine the status of your system with the LCD screen.
Table
3-3 describes the general LCD screen system fields.
Table 3-3 General system fields description
Field Description
HH:MM:SS Displays time of day in hour:hour, minute:minute, second:second format.
Log Disk xx% Shows the percentage of log partition filled.
Int0 xxxxMb/s Shows the throughput rate for the inside interface (Mbps).
Int1 xxxxMb/s Shows the throughput rate for the outside interface (Mbps).
MEM xx% Shows the percentage of memory usage.
Users xxxxx Shows the number of connected users.
CPU xx% Shows the percentage of CPU usage.