Symantec 4400 Series, Руководство по установке, Страница: 36 / 100

32 Appliance setup and initial system configuration
Command-Line Interface (CLI) features
8 To pre-configure the Internal authentication server, at the Use the internal
authentication server prompt, type:
yes
You must type the full word: yes or no.Typing yes starts the Internal
authentication server and creates a Role called officeRole, a Scheme
(SCVGScheme), and a test user (demo).
9 To pre-configure a simple access rule and Quicklink, at the Pre-configure an
http-only access rule the default user prompt, type yes,
10 At the Hostname to grant HTTP access to (‘*’ for all hosts) prompt type one
of the following:
■
A host name to give access to a specific system
■
*
( an asterisk ) for to give access to all hosts
Hostname to grant HTTP access to (‘*’ for all hosts)
The Clientless VPN Gateway creates a simple rule and assigns the rule to
officeRole; this rule allows the demo user (and other members of the
officeRole) to access the host through the user interface.
11 When the Quickstart Wizard is complete, it displays:
Quickstart has finished
12 Use the PING command to PING another computer on the LAN from the
Clientless VPN Gateway to verify the connection.
13 To exit the command-line interface, type the following command: exit.
See “About the Security Gateway Management Interface” on page 27. To
continue configuring the Clientless VPN Gateway appliance for your network,
log on to the SGMI.
For a demonstration of the system, sign in to the user interface with the demo
account that was automatically configured by the Quickstart Wizard.
Command-Line Interface (CLI) features
For convenience the Command-line interface has the following features:
■
Uniform command formats
■
Auto-complete
■
Auto-list